First Choice in Cost and Coverage

VALUE ADVANTAGE® is a competitive lineup of service parts that are approved and validated by Nissan Engineers for Nissan vehicles. Applications are available for up to 95% of all Nissan Vehicles. VALUE ADVANTAGE® has consolidated part numbers to reduce Dealer inventory costs. VALUE ADVANTAGE® will continue to introduce new applications to meet Dealer needs.

Warranty
Standard: 12 Months/12,000 Miles (whichever occurs first)
Brake Parts*: 36 Months/36,000 Miles (whichever occurs first)
*Pads, Shoes, Rotors, Drums
Engine: 3-Years/Unlimited Miles
(applies for products sold after July 1st 2024)
Transmission: 3-Years/Unlimited Miles
(applies for products sold after July 1st 2024)

Brakes

G
Brake Pads & Shoes
J
Fully Coated Brake Rotors
F
Brake Drums
E
Brake Calipers (reman)

Filtration

g
Cabin Air Filters
B
Engine Air Filters
Q
Fuel Filters

HVAC

A
AC Compressors
S
Radiators & Condensers

Chassis & Steering

O
CV Axles
N
Complete Strut Assemblies (CSA)
U
Shocks & Struts
W
Steering Pumps (reman)
X
Steering Racks (reman)
Y
Tie Rod Outer
b
Wheel Hubs & Bearings
a
TPMS Repair Kits

Engine & Transmission

C
Alternators (reman)
i
Starters (reman)
M
Clutch Kits
P
Electronic Throttle Bodies (reman)
T
Engines (reman)
j
Transmissions (reman)
V
Spark Plugs
Z
Timing Belt Kits

Body Components

c
Wiper Blade
Premium Beam, Hybrid Beam
R
Hood & Trunk Lift Supports
h
Headlights

G

Brake Pads

  • All kits include pads, hardware, shims, and a grease pack where applicable
  • Nissan engineering validated product performance
  • Excellent durability and stopping power
  • BRAKE PARTS WARRANTY:
    36 Months/36,000 Miles (whichever occurs first)

K

Brake Shoes

  • Enhanced durability; premium new steel featuring a premium dipped coating. This coating provides corrosion resistance for superior durability
  • BRAKE PARTS WARRANTY:
    36 Months/36,000 Miles (whichever occurs first)

E

Brake Calipers (reman)

  • Produced using OE approved components and procedures
  • Tested to OE performance specifications on computerized test stands
  • Every unit is tested for pressure, leak down, and piston movement
  • Banjo bolt seal, copper washer, and all piston seals replaced
  • Floating calipers include all brackets
  • Powder coated surface allows for uniform appearance and lasting finish
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

J

Fully Coated Brake Rotors

  • Fully coated rotors provide exceptional rust protection
  • Form, fit and function validated by Nissan engineers
  • Non-directional ground finish on rotors mean they are ready to install right out of the box
  • Rotors meet SAE Tensile Strength Standard for structural integrity and maximum service life
  • Precise rotor thickness and controlled lateral run-out reduce pedal pulsation and brake noise
  • Rotors meet SAE standard for tensile strength; use G3000 qualified material. Lateral run-out is 0.004” or less
  • BRAKE PARTS WARRANTY:
    36 Months/36,000 Miles (whichever occurs first)

F

Brake Drums

  • Meets SA J431 material an design requirements for increased performance and service life
  • Validated for proper balance and harmonics: each drum is 100% inspected to ensure smooth brake operation and noise-free performance
  • BRAKE PARTS WARRANTY:
    36 Months/36,000 Miles (whichever occurs first)

b

Wheel Hub Assemblies and Wheel Hub Bearing Kits

  • 100% tested to Nissan specification by Nissan engineers
  • Proper heat treatment conducted and controlled on each unit
  • Premium Seals and grease
  • Precision assembly tolerances and bearing preload
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

B

Air Filters (engine)

  • Helps remove soot and dust from the air flowing into your engine
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

g

Cabin Air Filters (CN95)

  • The anti-microbial media of the Nissan CN95 cabin air filters inhibit growth of 95% of captured microorganisms resulting in improved cabin air quality
  • Protection against allergens and smallmicroorganisms >2 microns
  • Efficient at absorbing foul odors and harmful outside gases (benzene and ozone)
  • Designed to fit the same as the OE Cabin Air Filter
  • High dust holding capacity due to a high filtration efficiency rate
  • Filters and removes most fine dust, pollen, road dust, soot, and bacteria
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

Q

Fuel Filters

  • VALUE ADVANTAGE® fuel filters are validated and tested by Nissan engineers
  • Fuel filters help protect fuel systems and engine components
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

Y

Tie Rod Outer

  • Strong, Durable construction provides consistent torque for smooth operation
  • Low friction double bearing for high impact resistance
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

c

Wiper Blades

  • Enhanced beam wiper blade design with new easy-to-install connection system
  • Nissan engineering approved for all Nissan models
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

h

Headlights

  • VALUE ADVANTAGE® headlights are CAPA certified
  • They have been 100% tested during development to guarantee fitment, function, and proper performance
  • VALUE ADVANTAGE® headlights are tested in accordance to IEC CISPR 25 methods for any electromagnetic interference (EMC and ESD) to SAE J1113-3, 4, 21 standards
  • All headlights are 100% 18 point visual tested off the line to maintain a quality product everyt time
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

R

Hood and Trunk Support

  • Designed for OE form, fit, and function for an easy instillation
  • Heavy gage steel body for long life and electro-statically painted and heat cured to the OE specification
  • Approved by Nissan engineering
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

a

TPMS Kits

  • VALUE ADVANTAGE® Tire Pressure Monitoring System service pack kits offer a new revenue stream for tire sales and maintenance to help grow your business. Nissan recommends that the TPMS sealing components be replaced every time a tire is removed from the rim.
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

V

Spark Plugs

  • Part number reduction to reduce inventory investment
  • Tested and validated by Nissan engineering on Nissan vehicles
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

T

Ignition Distributors

  • 100% New
  • Eliminates need to reuse old components or purchase those components
  • Eliminates the need to reuse old harness and wire splicing
  • Each unit is 100% tested before they leave the factory
  • Additional gel added to the module to reduce the potential of a thermal failure
  • Complete assemblies with cap, rotor, and shaft seals, ready to install
  • Precision machined bodies assure correct fit and accurate mount locations
  • Precision machined ground shafts assure high speed accuracy and prevent bearing failures
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

P

Electronic Throttle Body (reman)

  • Manufactured using OE approved components and procedures
  • Computerized testing of motor, throttle position sensor and articulation
  • Testing ensures OE specifications are met
  • Every component is inspected, remanufactured or replaced for a durable high-quality product
  • Cleaning process helps prevent the throttle bore surface from being damaged and ensures optimum airflow
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

A

A/C Compressors

  • Manufactured to Nissan OE specification for form, fit, and function
  • Tested and validated by Nissan engineers
  • Each unit is prefilled with oil to establish OE specifications
  • All units are put through rigorous durability testing that simulates operating 50,000 miles in the most extreme conditions
  • All compressors are 100% tested for noise and leaks to ensure long lasting operation
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

d

Condensers

  • Designed and tested for easy drop-in fit
  • Premium aluminum material for greater durability
  • Manufacturer tested and validated by Nissan Engineers
  • Benchmarked OE manufacturing process to control quality
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

S

Radiators

  • VALUE ADVANTAGE® radiator assemblies are backed by quality assurance of the Nissan brand. VALUE ADVANTAGE® quality materials and manufacturing enhance cooling and component reliability.
  • Radiator Tanks – Precision manufactured to achieve uniform wall thickness throughout the tank, reducing weakness and leaks
  • Oil Coolers – Premium materials and cutting-edge designs prevent leaks and damage transmissions
  • Tubes and Fins – Optimal tube and fin configuration provided ideal coolant flow and efficient heat transfer
  • Header Plates – Designed and precision cut to provide tight seals and long-lasting performance
  • Drain Plugs – Plugs incorporate high-quality components and superior design to reduce leaks
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

U

Shocks and Struts

  • Complete Product line offering over 95% application coverage
  • Precision engineered to OE part (where applicable), fit, form, and ride tested on the same Nissan applications for which they were designed to fit.
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

N

Complete Shock and Strut Assemblies (CSA)

  • Precision engineered to deliver the ride and performance designed into every Nissan
  • No spring compressor needed for installation
  • Help increase repair bay turns and service more customers
  • Complete assemblies reduce the number of come backs as it helps the repair right first time goal
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

O

CV Axles

  • VALUE ADVANTAGE® CV Axles are designed from the ground up to be the highest quality, most reliable, and toughest CV axles available
  • They can be found in front-wheel drive, four-wheel drive and rear-wheel drive vehicles equipped with independent suspension systems
  • Diagnosing and identifying CV Axle problems can present additional service opportunities for your facility
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

X

Steering Racks (reman)

  • Produced using OE approved components and procedures
  • Tested to the OE performance specifications on computerized test stands
  • Competitive pricing vs. aftermarket alternatives
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

W

Steering Pumps (reman)

  • Produced using OE approved components and procedures
  • Tested to the OE performance specifications on computerized test stands
  • Competitive pricing vs. aftermarket alternatives
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

i

Starters (reman)

  • All Nissan VALUE ADVANTAGE® starters and alternators are dissassembled and cleaned thoroughly
  • Moving components are cleaned and inspected for imperfections
  • Electronic components are tested during disassembly to ensure Original Equipment quality is met
  • During the disassembly and cleaning processes, if it is deemed the component will not meet quality expectations that items is replaced
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

C

Alternators (reman)

  • Front housing inspected, cleaned, and re-tapped to Nissan specifications
  • Rotor assembly inspected, tested, and balanced to OE specifications
  • Rectifier/diode tested for optimal performance
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

M

Clutch Kits

  • VALUE ADVANTAGE® Clutch Kits are validated and tested on Nissan vehicles for fit, form, and function
  • For ease of installation, each Clutch Kit includes every component required by technicians for efficient and effective installation including: Clutch disc Assembly, Release Bearing, Alignment Tool, Grease Packet, Pressure Plate Cover Assembly, Installation Guide
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

Z

Timing Belt Kits

  • A solution for most applications – includes all the parts necessary for a complete timing system replacement in one package, eliminating additional time required to source individual parts
  • All components are tested and validated by Nissan Engineering and are OE approved for Nissan engines
  • STANDARD WARRANTY:
    12 Months/12,000 Miles (whichever occurs first)

j

Transmissions (reman)

  • Remanufactured and tested to meet or exceed Nissan original specifications
  • Cost effective solution when a vehicle is out of warranty and a replacement is needed
  • Remanufactured transmissions are made in the USA
  • Shipped in returnable containers to simplify core returns
  • TRANSMISSION WARRANTY:
    3-Years/Unlimited Miles (applies for products sold after July 1st 2024)

T

Engines (reman)

  • 3.7 long and short block/4.0 long block applications
  • Performance and endurance verified by dynamic in-vehicle testing
  • Machined to exact specifications with top-of-the-line equipment
  • Competitive pricing, 100% core credit, no charge backs or deductions
  • ENGINE WARRANTY:
    3-Years/Unlimited Miles (applies for products sold after July 1st 2024)